Direct installation
A mounting close to the support for a discreet reading of the lettering and logo.
Sign ranges
Cut letters
& raised logos.
Cut-out letters and logos for a legible identity, with the material, thickness and finish adapted to the project.
Understand the product
The principle
of construction.
Cut-out letters and raised logos highlight the shape and material. The final result depends on thickness, finish, substrate and fixing method.
Raised & cut letters
Which model would you like?
Choose a sub-family, then the exact product. Then open its mounting submenu to display its assembled 3D plan: at night for lit or backlit products, by day for products without lighting. Then add your selection to the basket or return to the families menu.
← All familiesDibond / aluminium composite letters2 models
Non-illuminated Dibond lettersChoose mounting
Cutting of an aluminium composite panel, decoration and fixing according to the support.
Characteristics and points to be specified
R01 · Relief & cut-out letters
- Materials
- Dibond / aluminium composite
- Lighting
- Non-illuminated
Edge quality, fixing and colour.
Halo/backlit Dibond lettersChoose mounting
Opaque composite face and rear lighting system studied with the offset.
Characteristics and points to be specified
R02 · Relief & cut-out letters
- Materials
- Dibond / suitable rear system
- Lighting
- Backlighting
LED system retention and rear diffusion.
PMMA / Plexiglas letters3 models
Non-illuminated PMMA / Plexiglas lettersChoose mounting
Pieces cut from an acrylic sheet, transparent, opaque or tinted depending on the desired finish.
Characteristics and points to be specified
R03 · Relief & cut-out letters
- Materials
- PMMA / Plexiglas
- Lighting
- Non-illuminated
Thickness, edge finish and fixing.
PMMA halo/backlit lettersChoose mounting
Face and masking adapted to direct the light towards the support.
Characteristics and points to be specified
R04 · Relief & cut-out letters
- Materials
- PMMA / base or backlighting
- Lighting
- Backlighting
Opaque areas, distances and LED retention.
PMMA diffusing LED block lettersChoose mounting
Thick machined pieces with integrated lighting; face and edges according to the masking required.
Characteristics and points to be specified
R05 · Relief & cut-out letters
- Materials
- Diffusing PMMA
- Lighting
- Illuminated face and edges
Machining, integrated LEDs and diffusion areas.
PVC letters2 models
Non-illuminated PVC lettersChoose mounting
Cutting in a lightweight opaque material, with a finish suited to the environment.
Characteristics and points to be specified
R06 · Relief & cut-out letters
- Materials
- Expanded or compact PVC
- Lighting
- Non-illuminated
Use, rigidity and surface finish.
PVC halo/backlit lettersChoose mounting
Opaque face and rear lighting creating a halo on the wall.
Characteristics and points to be specified
R07 · Relief & cut-out letters
- Materials
- PVC / rear LED system
- Lighting
- Backlighting
Finish, fixing and ventilation of the components.
Aluminium letters2 models
Cut aluminium lettersChoose mounting
Solid pieces cut and then finished, with no integrated lighting.
Characteristics and points to be specified
R08 · Relief & cut-out letters
- Materials
- Aluminium
- Lighting
- Non-illuminated
Thickness, rigidity, treatment and coating.
Aluminium halo/backlit lettersChoose mounting
Opaque face and rear-mounted lighting, with an assembly allowing the halo to diffuse.
Characteristics and points to be specified
R09 · Relief & cut-out letters
- Materials
- Aluminium / backlighting
- Lighting
- Backlighting
Offset, access and finish of the support.
Wooden letters1 model
Wooden letters for interior fit-outChoose mounting
Cutting decorative letters in a chosen wood support to suit the atmosphere and finish.
Characteristics and points to be specified
R12 · Relief & cut-out letters
- Materials
- Wood or suitable panel
- Lighting
- Non-illuminated
Conditions of use, edges and protection.
Volumes, assemblies and components
Explore the construction
in three dimensions.
Day and night views, assembled, exploded and open: examine the parts, then activate “LEDs & power supply” to read the routing of the connections and the layout of the modules. The channel letters are shown without an apparent border. The models explain the principles; the manufacturing characteristics are defined for each project.
Select Day or Night to identify the lit areas. Indicative rendering; intensity and colour to be defined. Rotate the model using the control or by dragging it with the mouse. Tap a number or a component in the legend: only one link appears and the part is highlighted.
Choose a component
Its function and the technical points to be specified will appear here.
The template is an installation document, not a piece left behind the letter.
All components and technical points to be specified
| Reference / component | Function and characteristics |
|---|---|
| 01 / Existing support | Note the material, surface condition and presence of insulation or cladding. |
| 02 / Marking template | Positioning of the letters and drill points. Size and supply to be agreed. |
| 03 / Studs / anchors | Indicative mechanical fixings. Number, diameters and anchoring depend on the project. |
| 04 / Stand-offs | Offset pieces between the letter and the support. Length, material and removability to be defined. |
| 05 / Solid letter · aluminium | Cut aluminium part. Quality, thickness, finish and fixings to be specified. |
Download the vector 3D view · Displayed assembly sheet Download the LEDs & power supply view
From component to product
Manufacturing stages.
- 01
Vector path check
- 02
Cutting then finishing the edges
- 03
Preparation of the fixings and template
- 04
Identification and installation according to the substrate
Points to be defined
Build the right response.
| Material | Dibond / aluminium composite, PMMA / Plexiglas, PVC or aluminium depending on the finish and conditions of use. |
|---|---|
| Thickness | To be defined according to the format, the rigidity required and the desired relief. |
| Outline | Stroke fineness, small parts and counters to be checked from the vector file. |
| Surface | Colour, material appearance or finishing treatment to be specified. |
| Direct installation | Fixing and preparation of the support to be studied according to the material and the site. |
| Installation with stand-offs | Offset of the bracket and positioning of the fixing points to be planned. |
Compare the options
The configurations.
Professional questions
Before pricing.
Why a vector file?
It defines the cut contours. AI, EPS or PDF files containing vector paths make it possible to examine the graphic.
Is the thickness identical for all letters?
It is chosen according to the material, dimensions, shape and desired finish. It is confirmed in the technical proposal.
Can it be installed on an uneven surface?
The nature and condition of the support must be identified. Photos and dimensions make it possible to prepare a suitable study.
How do I keep the alignment?
The installation and fixing positions are prepared from the visual and the chosen assembly. The installation documents or accessories must be specified in the quotation.
Prepare for receiving and installation
Define what is supplied.
To compare quotations on the same basis, please have these elements specified in your request.
| Documents | Proof, validated dimensions, marking-out and any installation template. |
|---|---|
| Assembly | Fixings, stand-offs or mounting rails, quantity and compatibility with the support. |
| Electrical | For illuminated versions: LED, power supply, cabling and scope of connection. |
| Delivery | Packaging, destination, transport, unloading and any handling. |
| Tracking | Care advice, access to components and applicable warranty conditions. |
This list is intended to frame the order: it does not mean that all these elements are systematically included.
03 / OPTIONS TO CONSIDER
The relief in detail.
- Dibond, PMMA / Plexiglas, PVC and metals to be assessed
- Direct installation or with stand-offs
- Colours and finishes according to the artwork
The final choice depends on the graphic, dimensions, environment and installation conditions. Materials, processes and finishes are confirmed for each project.
Add this model to the basket +| File | Vector logo or lettering |
|---|---|
| Material | Choice according to use and appearance |
| Thickness | To be defined according to the format |
| Finish | Colour, appearance and treatment |
| Assembly | Direct, stand-offs or intermediate support |
Your next project
starts here.
Send the visual, dimensions and site constraints. We will review the technical solution and quotation with you.
View my quotation basketFlat-cut lettering and dimensional logos
Flat-cut letters and raised logos for professional signage: aluminium letters, acrylic PMMA letters, PVC, aluminium composite such as Dibond, and timber according to the project. Compare direct fixing, mounting rails and stand-offs; specify letter thickness, finish and artwork proportions for your trade quotation.