Illuminated face
The light passes through the diffusing face. To be studied for a logo or lettering that needs to be illuminated on the front.
Sign ranges
Illuminated channel letters
and backlit.
Three-dimensional letters, illuminated, with halo/backlighting or non-illuminated, with individual fixing, on stand-offs or on mounting rails depending on the project.
Understand the product
The principle
of construction.
The manufacture of bespoke channel letters combines a face, sides, a back and, for a lit version, front LED lighting or halo/backlighting. Each element contributes to the appearance and to installation preparation.
Channel letters
Which model would you like?
Choose a sub-family, then the exact product. Then open its mounting submenu to display its assembled 3D plan: at night for lit or backlit products, by day for products without lighting. Then add your selection to the basket or return to the families menu.
← All familiesMetal channel letters6 models
Metal box · luminous face without visible borderChoose mounting
Diffusing face and metal edges, with a front finish without a visible applied edge.
Characteristics and points to be specified
LB02 · Channel letters
- Materials
- Aluminium / PMMA
- Lighting
- Illuminated face
Face retention and layout tolerances.
Metal box · halo backlightingChoose mounting
Opaque face and light directed towards the support; the offset creates the halo diffusion space. Finish without visible border.
Characteristics and points to be specified
LB03 · Channel letters
- Materials
- Aluminium
- Lighting
- Backlighting
Distance from wall, substrate colour and electrical access.
Box · luminous face + haloChoose mounting
Two combined effects: illuminated reading on the face and halo behind the letter. Finish without visible border.
Characteristics and points to be specified
LB04 · Channel letters
- Materials
- Metal / diffusing PMMA
- Lighting
- Face + backlighting
Front and rear diffusion, offset and circuits.
Non-illuminated metal boxChoose mounting
Closed volume with opaque face, without LEDs or power supply, with fixings suited to the façade. Finish without visible border.
Characteristics and points to be specified
LB05 · Channel letters
- Materials
- Aluminium
- Lighting
- Non-illuminated
Finish, base plate to be removed and anchors.
Box · opaque face, luminous sidesChoose mounting
Opaque metal face combined with diffusing edges for side reading of the volume. Finish without visible border.
Characteristics and points to be specified
LB07 · Channel letters
- Materials
- Metal / PMMA
- Lighting
- Luminous sides
Light diffusion and face overlap areas.
Prismatic metal box (bevelled face)Choose mounting
Faceted or bevelled face giving relief to a metal letter. Opaque or halo version to be considered. Finish without visible border.
Characteristics and points to be specified
LB12 · Channel letters
- Materials
- Aluminium
- Lighting
- Illuminated or non-illuminated, subject to study
Facets, welds and edge finishing.
PMMA letters and LED blocks3 models
PMMA box · luminous face and sidesChoose mounting
Diffusing construction to light the face and sides of the volume. Finish with no visible border.
Characteristics and points to be specified
LB06 · Channel letters
- Materials
- Diffusing PMMA / suitable base
- Lighting
- Illuminated face and edges
Uniformity, opaque areas and closure.
Thermoformed PMMA boxChoose mounting
Face and formed returns in PMMA, with suitable lighting equipment and backing. Finish without visible border.
Characteristics and points to be specified
LB08 · Channel letters
- Materials
- PMMA / technical back panel
- Lighting
- Illuminated face
Thermoforming, radii, closure and diffusion.
Solid block letter with LEDChoose mounting
Machined PMMA receiving integrated LEDs; diffusion through the face, edges or rear depending on the construction. Finish without visible edging.
Characteristics and points to be specified
LB09 · Channel letters
- Materials
- Solid PMMA
- Lighting
- Illuminated face and edges
Machining, access and masking areas.
Decorative letters with visible light sources2 models
Box with visible LEDsChoose mounting
Light points arranged on the face for a deliberately visible dot effect. Finish with no visible border.
Characteristics and points to be specified
LB10 · Channel letters
- Materials
- Metal or technical panel
- Lighting
- Illuminated face
Layout of points, maintenance and protection.
Vintage bulb letterChoose mounting
Box with visible light sources for a decorative antique-sign effect. Finish without visible border.
Characteristics and points to be specified
LB11 · Channel letters
- Materials
- Metal / suitable light sources
- Lighting
- Illuminated face
Sources, lamp holders, power supply and maintenance.
Volumes, assemblies and components
Explore the construction
in three dimensions.
Day and night views, assembled, exploded and open: examine the parts, then activate “LEDs & power supply” to read the routing of the connections and the layout of the modules. The channel letters are shown without an apparent border. The models explain the principles; the manufacturing characteristics are defined for each project.
Select Day or Night to identify the lit areas. Indicative rendering; intensity and colour to be defined. Rotate the model using the control or by dragging it with the mouse. Tap a number or a component in the legend: only one link appears and the part is highlighted.
Choose a component
Its function and the technical points to be specified will appear here.
The exploded view separates the face to show the hollow volume, the LEDs and the electrical routing. Finish without visible edging; the face is held in place by an internal system to be defined.
All components and technical points to be specified
| Reference / component | Function and characteristics |
|---|---|
| 01 / Installation support | Façade to be identified: type, condition, insulation, rear access and openings. Installation is studied on the actual support. |
| 02 / Fixings / stand-offs | Mechanical example. Number, offset, diameter and anchor points are to be defined according to the substrate. |
| 03 / Base / foot | It carries the LEDs and closes the back. Material and thickness to be specified. |
| 04 / LED modules | Modules on the base. Distribution according to the layout and depth; voltage, colour and power to be specified. |
| 05 / Hollow edges | Chants en tôle aluminium pliée et thermolaquée, épaisseur 1,5 mm. Profondeur et assemblage selon le projet. Matière choisie : à préciser. |
| 06 / Removable diffusing face | 3 mm light-diffusing PMMA face, with no visible trim. Internal retention and maintenance access to be specified. |
| 07 / LED power supply / transformer | Power supply positioned behind the letter, within its outline. Access, protection, ventilation and rear housing depend on the mounting arrangement. |
| 08 / LED connections (+ / −) | The routing of the two conductors follows the modules. The connections are shown for the purpose of understanding the principle; sections, protection and connections are defined in the technical file. |
Download the vector 3D view · Displayed assembly sheet Download the LEDs & power supply view
From component to product
Manufacturing stages.
- 01
Cutting of the faces and backs
- 02
Shaping and assembling the sides
- 03
LED integration and lighting test
- 04
Closing and installation marking
Points to be defined
Build the right response.
| Face | Opaque or diffusing depending on the lighting method. Material and colour to be defined. |
|---|---|
| Sides | Material, depth, appearance and colour to be specified according to the visual. |
| Back | Construction and cable routes to be planned according to the mounting. |
| Lighting | Front-lit, halo/backlit or combined: the construction must match the required finish. |
| Fixings | Direct installation, stand-offs or intermediate support to be assessed according to the façade. |
| Finish | RAL reference or other colour, matt, satin, gloss or metallic finish depending on the material. |
Compare the options
The configurations.
Professional questions
Before pricing.
Which dimensions should be sent?
The total length and height, then the letter height if known. Also indicate accents, symbols and any other logo elements.
Can we choose a gold or black finish?
Specify the desired finish, ideally with a reference or a sample. The material, treatment and finish selected are specified in the quote.
Why provide a façade photo?
It helps identify the support, the environment and the points to be considered for fixing and the lighting effect.
Is the price calculated solely per letter?
The quotation depends in particular on the design, dimensions, materials, lighting, finish and installation. The complete graphic is required.
Prepare for receiving and installation
Define what is supplied.
To compare quotations on the same basis, please have these elements specified in your request.
| Documents | Proof, validated dimensions, marking-out and any installation template. |
|---|---|
| Assembly | Fixings, stand-offs or mounting rails, quantity and compatibility with the support. |
| Electrical | For illuminated versions: LED, power supply, cabling and scope of connection. |
| Delivery | Packaging, destination, transport, unloading and any handling. |
| Tracking | Care advice, access to components and applicable warranty conditions. |
This list is intended to frame the order: it does not mean that all these elements are systematically included.
01 / OPTIONS TO CONSIDER
From volume. From light.
- Front lighting or backlighting to be considered
- Faces, edges and depth according to the project
- Fixings suited to the façade
The final choice depends on the graphic, dimensions, environment and installation conditions. Materials, processes and finishes are confirmed for each project.
Add this model to the basket +| Visual | Vector logo, typeface and colours |
|---|---|
| Dimensions | Letter height and overall length |
| Lighting | Desired finish, colour and installation |
| Construction | Faces, edges, backing and depth |
| Installation | Support, access, height and fixings |
Channel letters manufacturer for sign makers.
To prepare your sign, compare the construction of the volume, light diffusion and mounting. Each letter is assessed from your logo and its proportions.
Illuminated letters without returns
A sign without a trim strip has a face without an applied border on the front. Please specify this finish in your request; the construction and holding of the PMMA face are validated according to the dimensions.
Prismatic letters and LED blocks
Prismatic letters with a chamfered face create a faceted relief. LED block letters in PMMA use machined material and diffusion zones defined by the construction. These models correspond to distinct catalogue solutions.
Finishes and lighting
Front lighting, halo backlighting or non-illuminated version: please specify the expected finish and shade. For a RAL coating on aluminium edges, please state the reference and finish to be confirmed in the quotation.
Your next project
starts here.
Send the visual, dimensions and site constraints. We will review the technical solution and quotation with you.
View my quotation basketBespoke channel letters and halo-lit letters
LED channel letters for sign makers and resellers: front-lit channel letters, halo-lit or backlit letters, and non-illuminated built-up letters. Compare acrylic PMMA faces, aluminium returns, trimless channel letters and prismatic bevelled faces. Construction, RAL finish and fixing details are confirmed in the quotation.