Folded tray panel + channel letters
Sheet metal face with applied channel letters. Front illumination of the letters; a non-illuminated version can be considered.
Luminous or non-luminous variant depending on the project.
Sign ranges
Illuminated boxes
& folded tray panels.
Box to box cabinets, illuminated or not, with diffusing face, applied channel letters or through-illumination PMMA depending on the project.
Understand the product
The principle
of construction.
The sign box, illuminated or non-illuminated, is built box to box: a back with returns and a fitted front box, carrying the graphic or applied elements. Lighting depends on the version. Access to the internal elements is planned from the design stage.
Sign boxes & folded tray panels
Which model would you like?
Choose a sub-family, then the exact product. Then open its mounting submenu to display its assembled 3D plan: at night for lit or backlit products, by day for products without lighting. Then add your selection to the basket or return to the families menu.
← All familiesSolid or diffusing face boxes5 models
Box to box · opaque non-luminous faceChoose mounting
Back panel with returns and clipped-in front box with opaque face and applied decoration.
Characteristics and points to be specified
C01 · Sign boxes & folded tray panels
- Materials
- Aluminium sheet / decoration
- Lighting
- Non-illuminated
Interlocking, closing and expansion.
Box to box · luminous PMMA faceChoose mounting
Internal lighting behind a diffusing face, with access to the components.
Characteristics and points to be specified
C02 · Sign boxes & folded tray panels
- Materials
- Sheet metal / opal PMMA
- Lighting
- Illuminated face
Diffusion, depth and maintenance access.
Box to box · rear backlightingChoose mounting
Opaque front face with light directed towards the façade, with an offset allowing for the halo.
Characteristics and points to be specified
C03 · Sign boxes & folded tray panels
- Materials
- Sheet metal / diffusing rear elements
- Lighting
- Backlighting
Rear of the cabinet, light and support finish.
Box to box · luminous face + haloChoose mounting
Front lighting and backlighting studied separately within the same assembly.
Characteristics and points to be specified
C04 · Sign boxes & folded tray panels
- Materials
- Sheet metal / PMMA
- Lighting
- Face + backlighting
Double diffusion, access and power supply.
Box with shadow gap / peripheral lightChoose mounting
A peripheral separation highlights the volume and may allow the light to show through.
Characteristics and points to be specified
C12 · Sign boxes & folded tray panels
- Materials
- Sheet metal / diffusing depending on construction
- Lighting
- Illuminated or non-illuminated, subject to study
Hollow joint, light path and drainage.
Folded tray panels with applied letters2 models
Folded tray panel + channel lettersChoose mounting
box to box construction with applied boxes, lit or opaque faces.
Characteristics and points to be specified
C05 · Sign boxes & folded tray panels
- Materials
- Sheet metal / metal-PMMA boxes
- Lighting
- Illuminated or non-illuminated, subject to study
Fixing of the letters and cable entry.
Diffusing PMMA face + boxesChoose mounting
Diffusing back panel and applied boxes, with independent lighting or no lighting.
Characteristics and points to be specified
C06 · Sign boxes & folded tray panels
- Materials
- Sheet metal / PMMA / channel letters
- Lighting
- Illuminated or non-illuminated, subject to study
PMMA retention and fixing of the boxes.
Perforated faces and raised PMMA3 models
Perforated sheet metal + bonded PMMAChoose mounting
Cutting the graphic in the sheet metal and placing PMMA behind it to diffuse or create contrast.
Characteristics and points to be specified
C07 · Sign boxes & folded tray panels
- Materials
- Sheet metal / diffusing PMMA
- Lighting
- Illuminated or non-illuminated, subject to study
Cutting, bonding and internal access.
Perforated sheet metal + flush PMMAChoose mounting
PMMA insert fitted into the cut-out to achieve a face flush with the sheet metal.
Characteristics and points to be specified
C08 · Sign boxes & folded tray panels
- Materials
- Machined sheet metal / PMMA
- Lighting
- Illuminated or non-illuminated, subject to study
Tolerances, retention and flatness.
PMMA through-cut · 5 mm projectionChoose mounting
The PMMA passes through the cut-out and extends 5 mm in front of the outer face of the sheet metal.
Characteristics and points to be specified
C09 · Sign boxes & folded tray panels
- Materials
- Machined sheet metal / PMMA
- Lighting
- Illuminated or non-illuminated, subject to study
5 mm projection, rear connection and maintenance.
Textile faces and tensioned tarpaulins2 models
Box to box · tensioned textile faceChoose mounting
Textile printed face held by a tension system adapted to the construction.
Characteristics and points to be specified
C10 · Sign boxes & folded tray panels
- Materials
- Sheet metal / diffusing textile
- Lighting
- Illuminated or non-illuminated, subject to study
Tension, graphic replacement and use.
Box to box · tensioned banner faceChoose mounting
Flexible tensioned face for a large-format visual, illuminated or non-illuminated.
Characteristics and points to be specified
C11 · Sign boxes & folded tray panels
- Materials
- Structure / suitable banner
- Lighting
- Illuminated or non-illuminated, subject to study
Tension, splitting, transport and maintenance.
Volumes, assemblies and components
Explore the construction
in three dimensions.
Day and night views, assembled, exploded and open: examine the parts, then activate “LEDs & power supply” to read the routing of the connections and the layout of the modules. The channel letters are shown without an apparent border. The models explain the principles; the manufacturing characteristics are defined for each project.
Select Day or Night to identify the lit areas. Indicative rendering; intensity and colour to be defined. Rotate the model using the control or by dragging it with the mouse. Tap a number or a component in the legend: only one link appears and the part is highlighted.
Choose a component
Its function and the technical points to be specified will appear here.
box to box construction: back with returns and fitted front cover. The overlap, assembly gap and locking are defined for the project.
All components and technical points to be specified
| Reference / component | Function and characteristics |
|---|---|
| 01 / Facade support | Nature and strength of the substrate to be assessed. The illustrated mounting is a principle. |
| 02 / Installation fixings | Anchoring references to the frame. Number, dimensions and substrate compatibility to be reviewed. |
| 03 / Rear box / back with returns | First part of the box to box: backing with returns, carrying the fixings and components. Overlap, clearances and thicknesses to be defined. |
| 04 / LED layout | Indicative distribution. Density, optics and distance to the face to be assessed for diffusion. |
| 05 / Front box / snap-fit cover | Second part of the box to box: clipped return cap on the back panel. Retention and maintenance access to be specified. |
| 06 / Diffusing face | Rigid face shown. Material, thickness, print and removability to be defined. |
| 07 / Face retention | Example of retention edge: opening frame, glazing bead or another system to be defined. |
| 08 / LED power supply / transformer | Box, access and ventilation to be provided. Mains input and output to the LEDs marked separately; model and specifications to be defined for the project. |
| 09 / LED connections (+ / −) | The routing of the two conductors follows the modules. The connections are shown for the purpose of understanding the principle; sections, protection and connections are defined in the technical file. |
Download the vector 3D view · Displayed assembly sheet Download the LEDs & power supply view
From component to product
Manufacturing stages.
- 01
Preparation of the frame and backing
- 02
Lighting and wiring assembly
- 03
Installation of the face and visual
- 04
Light test and preparation of fixings
Points to be defined
Build the right response.
| Structure | box to box construction: back with returns and fitted front box. Dimensions, depth, material and finish to be defined. |
|---|---|
| Interlocking | Overlap of returns, assembly gap, closing and maintenance access to be specified. |
| Face | Rigid face, fabric, folded tray panel, diffusing PMMA, applied channel letters or through-letter PMMA according to the construction. |
| Visual | Logo, colours, print or lettering: files and desired finish to be specified. |
| Lighting | Layout of the light sources and diffusion to be studied with the depth and the visual. |
| Layout | On the façade, as a projecting sign or in another configuration: specify the location. |
| Maintenance | Opening, possible removal of the face and access to the power supply to be planned. |
Compare the options
The configurations.
Professional questions
Before pricing.
Which dimensions should be provided?
Desired width, height and depth, as well as the available space on the façade.
Can a replaceable graphic be provided?
This requirement must be stated at the outset in order to select a suitable construction and access.
Which file should be sent?
The vector logo and, for a printed graphic, the graphic file with its dimensions and colour references.
Should an electrical connection be provided?
Please specify the location of the existing or planned power supply. The connection and its scope are to be defined for the project.
Prepare for receiving and installation
Define what is supplied.
To compare quotations on the same basis, please have these elements specified in your request.
| Documents | Proof, validated dimensions, marking-out and any installation template. |
|---|---|
| Assembly | Fixings, stand-offs or mounting rails, quantity and compatibility with the support. |
| Electrical | For illuminated versions: LED, power supply, cabling and scope of connection. |
| Delivery | Packaging, destination, transport, unloading and any handling. |
| Tracking | Care advice, access to components and applicable warranty conditions. |
This list is intended to frame the order: it does not mean that all these elements are systematically included.
02 / OPTIONS TO CONSIDER
A coherent set.
- Folded tray panel, diffusing PMMA or fabric face depending on the construction
- Lighting and diffusion to be defined
- Custom-studied formats and finishes
The final choice depends on the graphic, dimensions, environment and installation conditions. Materials, processes and finishes are confirmed for each project.
Add this model to the basket +| Format | Width, height and depth |
|---|---|
| Face | Visual, support and diffusion |
| Lighting | Layout, power supply and access |
| Structure | Material, finish and fixing |
| Maintenance | Access to be planned according to the build |
Custom illuminated boxes for professionals.
Sign maker, agency or reseller: choose the construction based on the appearance of your logo. Diffusing PMMA face, folded tray panel with applied letters or perforated face with through PMMA require different assemblies.
Your illuminated signage supplier for professionals studies the dimensions, depth, technical access, fixings and destination. Send this information together with the visual to prepare the quotation for your box.
Prepare the box characteristicsYour next project
starts here.
Send the visual, dimensions and site constraints. We will review the technical solution and quotation with you.
View my quotation basketCustom sign lightboxes and folded tray panels
LED sign lightboxes and folded sign trays for the trade: box-to-box construction, illuminated acrylic faces, applied letters or cut-out panels with push-through acrylic. For tension-fabric or flex-face signs, specify the size and artwork. Depth, maintenance access and fixings are assessed for each project.